DYNAMIC SYSTEM
SELF-LEVELING SCREW SYSTEM FOR TILES
New practical mode, dynamic and fast for the installation of tiles and cladding modules. The dynamic leveling system consists of only two elements:
- the spacer has a base placed under the tiles and two side fins which determine the thickness of the joints and in addition the threaded pin where then will screwed the knob for the leveling operation of the tiles.
- the knob equipped with two lateral pressure points where the operator can easily introduce the threaded pin and then reach the desired leveling degree through the screwing of the knob on the pin. The knob, after hardening of the cement glue, is removed with a shot in the direction of the joint and pressing the two opposing lateral pressure points, the spacer can be extracted faster and without unscrewing the spacer pin remained inside. The knob will be ready for use again.
In addition the operator, alternatively to the knob, can use our patented spacer with the wedge and the clamp of the classical system. So a fast and versatile product that avoids double werehouse stocks, because interchangeable with the classic system already in use.
Features:
- faster use
- greater alignment precision
- anti-breaking system (dynamometric) on the fins
- ductility knob / pressure wedge
- two european patents
Watch the video presentation of the Dynamic System
There are available two types of dynamic spacers: the Cross spacer and the T spacer.
Cross dynamic spacer | ||
T dynamic spacer | ||
The Dynamic system is also available in a KIT complete with Spacer and Knob, in a transparent box.